Assembling the levelshifter PCB
In this post I show the process of assembling the levelshifter PCBs with my DIY hotplate
Showing only posts by Leo Moser. Show all posts.
Levelshifter PCB
I needed a levelshifter to interface a PS/2 keyboard with an FPGA. So I designed one.
Reflow Soldering Iron
This is the story of how an old iron gets transformed into something beautiful.
My first PCB — Programming the Board
The third and last part of my series about designing my first PCB in KiCad. In this last entry I will show you how I programmed the board to blink in patterns and sequences and to register input from the three buttons.
My first PCB — Assembling and Soldering
The second part of my series about designing my first PCB in KiCad. In this blog post I will show you how I soldered the board and my errors along the way.
My first PCB — Schematic and Layout
The first part of my series about designing my first PCB in KiCad. This blog post covers the design of the schematic and layout in KiCad.
Home Automation with Tasmota — ESP32
A guide on how to set up Tasmota for the ESP32.
Programming the ATtiny85 — the easy way
This post will guide you through how to compile and upload a program for Atmels ATtiny series
Reviewing the icestation-32
All about the icestation-32
Writing a Game Boy Emulator - Part 2
This is the second part of the series. Here we will properly implement the display and scrolling.
« newer articles | page 4 | older articles »