iCEBerg-FPGA
The iCEBerg FPGA development board is my first take on an FPGA design using the Lattice iCE40UP5k. The design was created in KiCad and is fully open source.
Showing only posts tagged KiCad. Show all posts.
Levelshifter PCB
I needed a levelshifter to interface a PS/2 keyboard with an FPGA. So I designed one.
My first PCB — Programming the Board
The third and last part of my series about designing my first PCB in KiCad. In this last entry I will show you how I programmed the board to blink in patterns and sequences and to register input from the three buttons.
My first PCB — Assembling and Soldering
The second part of my series about designing my first PCB in KiCad. In this blog post I will show you how I soldered the board and my errors along the way.
My first PCB — Schematic and Layout
The first part of my series about designing my first PCB in KiCad. This blog post covers the design of the schematic and layout in KiCad.